رضا عربلو
سه شنبه 19 آبان 1383, 22:57 عصر
چطور می توان فهمید که
1- ایا یک سرویس خاص وینذوز start شده است.
2 - یک سرویس را start کرد و تا start کامل ان منتظر ماند.
3 - به تنظیمات سرویس های ویندوز دسترسی داشت و آنها را تغییر داد.
:موفق:
hmm
چهارشنبه 20 آبان 1383, 07:45 صبح
من دقیقا منظورت رو نفهمیدم ولی با دستورهای زیر در cmd کار کن شاید مشکلت حل شد
net start
net stop
رضا عربلو
جمعه 22 آبان 1383, 00:10 صبح
مثلاٌ می خواهم وقتی که برنامه من اجرا می شود سرویس های که برای run شدن بانک ائراکل است (Oracle_Listener, Oracle_SID و Oracle_Service) را درصورت start نشدن آنها را start بکند و در پایان برنامه آنها را stop بکند.
hmm
شنبه 23 آبان 1383, 08:29 صبح
net start service name
رضا عربلو
جمعه 29 آبان 1383, 00:33 صبح
یونیت WinSvc دارای توابع مفیدی است (توابع API ویندوز) ولی نمی دانم چرا توابع OpenService و بعد از آن StartService باعث اجرای سرویس مد نظر نمی شود.
در ضمن net start در صورت عدم اجرای موفقیت آمیز سرویس هیچ خطایی باز نمی گرداند.
MM_Mofidi
جمعه 29 آبان 1383, 01:39 صبح
یک نمونه برنامه با vb میگذارم که با استفاده از wmi لیست service هایی که stop هستند را نشان میدهد. start کردن هر کدام هم خیلی راحت است
Mohsen_4194
جمعه 29 آبان 1383, 01:49 صبح
unit cwinsrvc;
interface
function ServiceGetStrCode(nID : integer) : string;
function ServiceGetStatus(sMachine,
sService : string) : DWord;
function ServiceRunning(sMachine,
sService : string) : boolean;
function ServiceStopped(sMachine,
sService : string) : boolean;
function ServiceStart(sMachine,
sService : string) : boolean;
function ServiceStop(sMachine,
sService : string) : boolean;
implementation
uses Windows, SysUtils, WinSvc;
// convert status codes returned by
// ServiceGetStatus() to string values
function ServiceGetStrCode(nID : integer) : string;
var
s : string;
begin
case nID of
SERVICE_STOPPED : s := 'STOPPED';
SERVICE_RUNNING : s := 'RUNNING';
SERVICE_PAUSED : s := 'PAUSED';
SERVICE_START_PENDING : s := 'START/PENDING';
SERVICE_STOP_PENDING : s := 'STOP/PENDING';
SERVICE_CONTINUE_PENDING : s := 'CONTINUE/PENDING';
SERVICE_PAUSE_PENDING : s := 'PAUSE/PENDING';
else
s := 'UNKNOWN';
end;
Result := s;
end;
// return status code if successful, -1 if not
// return codes:
// SERVICE_STOPPED
// SERVICE_RUNNING
// SERVICE_PAUSED
// following return codes are used to indicate that the // service is in the middle of getting to one
// of the above states:
// SERVICE_START_PENDING
// SERVICE_STOP_PENDING
// SERVICE_CONTINUE_PENDING
// SERVICE_PAUSE_PENDING
// sMachine:
// machine name, ie: \\SERVER
// empty = local machine
// sService
// service name, ie: Alerter
function ServiceGetStatus(sMachine,
sService : string) : DWord;
var
schm : SC_Handle; //service control manager handle
schs : SC_Handle; // service handle
ss : TServiceStatus; // service status
dwStat : DWord; // current service status
begin
dwStat := -1;
// connect to the service control manager
schm := OpenSCManager( PChar(sMachine), Nil,
SC_MANAGER_CONNECT);
// if successful...
if(schm > 0)then
begin
// open a handle to the specified service
// we want to query service status
schs := OpenService( schm, PChar(sService),
SERVICE_QUERY_STATUS);
// if successful...
if(schs > 0)then
begin
// retrieve the current status
//of the specified service
if (QueryServiceStatus( schs, ss)) then
begin
dwStat := ss.dwCurrentState;
end;
// close service handle
CloseServiceHandle(schs);
end;
// close service control manager handle
CloseServiceHandle(schm);
end;
Result := dwStat;
end;
// Return TRUE if the specified service is running,
// defined by the status code SERVICE_RUNNING. Return
// FALSE if the service is in any other state,
// including any pending states
function ServiceRunning(sMachine,
sService : string) : boolean;
begin
Result := SERVICE_RUNNING =
ServiceGetStatus(sMachine, sService);
end;
// Return TRUE if the specified service was stopped,
// defined by the status code SERVICE_STOPPED.
function ServiceStopped(sMachine,
sService : string) : boolean;
begin
Result := SERVICE_STOPPED =
ServiceGetStatus(sMachine, sService);
end;
// Return TRUE if successful
function ServiceStart(sMachine,
sService : string) : boolean;
var
schm,
schs : SC_Handle;
ss : TServiceStatus;
psTemp : PChar;
dwChkP : DWord; // check point
begin
ss.dwCurrentState := -1;
// connect to the service control manager
schm := OpenSCManager(PChar(sMachine), nil,
SC_MANAGER_CONNECT);
// if successful...
if(schm > 0)then
begin
// open a handle to the specified service
// we want to start the service and query service
// status
schs := OpenService(schm, PChar(sService),
SERVICE_START or SERVICE_QUERY_STATUS);
// if successful...
if(schs > 0)then
begin
psTemp := Nil;
if(StartService( schs, 0,psTemp))then
begin
// check status
if(QueryServiceStatus(schs, ss))then
begin
while(SERVICE_RUNNING <> ss.dwCurrentState)do
begin
// dwCheckPoint contains a value that the
// service increments periodically to
// report its progress during a
// lengthy operation. Save current value
dwChkP := ss.dwCheckPoint;
// wait a bit before checking status again
// dwWaitHint is the estimated amount of
// time the calling program should wait
// before calling QueryServiceStatus()
// again. Idle events should be
// handled here...
Sleep(ss.dwWaitHint);
if not QueryServiceStatus(schs, ss) then
begin
// couldn't check status break from the
// loop
break;
end;
if ss.dwCheckPoint < dwChkP then
begin
// QueryServiceStatus didn't increment
// dwCheckPoint as it should have.
// Avoid an infinite loop by breaking
break;
end;
end;
end;
end;
// close service handle
CloseServiceHandle(schs);
end;
// close service control manager handle
CloseServiceHandle(schm);
end;
// Return TRUE if the service status is running
Result := SERVICE_RUNNING = ss.dwCurrentState;
end;
// Return TRUE if successful
function ServiceStop(sMachine,
sService : string) : boolean;
var
schm,
schs : SC_Handle;
ss : TServiceStatus;
dwChkP : DWord;
begin
// connect to the service control manager
schm := OpenSCManager(PChar(sMachine), nil,
SC_MANAGER_CONNECT);
// if successful...
if schm > 0 then
begin
// open a handle to the specified service
// we want to stop the service and
// query service status
schs := OpenService( schm, PChar(sService),
SERVICE_STOP or SERVICE_QUERY_STATUS);
// if successful...
if schs > 0 then
begin
if ControlService(schs, SERVICE_CONTROL_STOP,
ss) then
begin
// check status
if(QueryServiceStatus(schs, ss))then
begin
while(SERVICE_STOPPED <> ss.dwCurrentState)do
begin
// dwCheckPoint contains a value that the
// service increments periodically to
// report its progress during a lengthy
// operation. Save current value
dwChkP := ss.dwCheckPoint;
// Wait a bit before checking status again.
// dwWaitHint is the estimated amount of
// time the calling program should wait
// before calling QueryServiceStatus()
// again. Idle events should be
// handled here...
Sleep(ss.dwWaitHint);
if(not QueryServiceStatus(schs,ss))then
begin
// couldn't check status
// break from the loop
break;
end;
if(ss.dwCheckPoint <
dwChkP)then
begin
// QueryServiceStatus didn't increment
// dwCheckPoint as it should have.
// Avoid an infinite loop by breaking
break;
end;
end;
end;
end;
// close service handle
CloseServiceHandle(schs);
end;
// close service control manager handle
CloseServiceHandle(schm);
end;
// return TRUE if the service status is stopped
Result := SERVICE_STOPPED = ss.dwCurrentState;
end;
end.
رضا عربلو
جمعه 29 آبان 1383, 23:36 عصر
از هر دو استاد متشکرم.
:flower: :flower:
vBulletin® v4.2.5, Copyright ©2000-1404, Jelsoft Enterprises Ltd.