ابعاد برنامه

[powerboy2988]

سلام
من یک برنامه نوشتم با vb
مشکلم اینه که تو سیستم خودم که ابعاد تصویر اون 1280 در 1024 هستش..
اما وقتی این برنامه رو سیستم های دیگه با ابعاد تصویر مختلف نصب می کنم .. برنامه رو کامل نشون نمیده ..
چیکار باید کرد؟؟

[Tasiyan]

استاندارد سازی
رزلوشن اونارم 1024 کن
:متفکر:

[sohrab o]

یک برنامه بنویس که موقع نصب اجرا بشه و رزولیشنو تغییر بده،بهتره رزولیشنی انتخاب کنی که اکثرا مورد استفاده قرار میگیره!
موفق باشی/

[powerboy2988]

نمیشه کاری کرد به جای تغییر رزولوشن، برنامه تغییر کنه؟
اینجوری شاید مشتری با ابعاد جدید کار نکنه!!

[xxxxx_xxxxx]

از آبجكت Screen براي تنظيم كردن موقعيت فرم استفاده كنيد.
مثلاً:


Me.Left = (Screen.Width - Me.Width) / 2

[sohrab o]

از این نمونه میتونی ایده بگیری!
موفق باشی/

[powerboy2988]

از آبجكت Screen براي تنظيم كردن موقعيت فرم استفاده كنيد.
مثلاً:


Me.Left = (Screen.Width - Me.Width) / 2


ممکنه یک توضیحی بدین؟
ممنون میشم

[Babak.Hassanpour]

ممکنه یک توضیحی بدین؟
ممنون میشم

Me.Left = (Screen.Width - Me.Width) / 2
Me.Left = (1024 - 1000) / 2
اینجوری فرم شما توی هر رزولوشنی وسط صفحه می مونه.البته Me.Top رو هم به همین طریق باید تنظیم کنید
Me.top = (Screen.height - Me.height) / 2
http://barnamenevis.org/forum/attachment.php?attachmentid=34060&stc=1&d=1248702873

[powerboy2988]

هیچ کدوم از این ها جواب نداد!!!!

[sohrab o]

هیچ کدوم از این ها جواب نداد!!!!

خوب یه نمونه سورستو بزار واست درست کنم

[mmssoft]

کد برای تغییر رزولوشن :



' Coded By FPG

Option Explicit
Const WM_DISPLAYCHANGE = &H7E
Const HWND_BROADCAST = &HFFFF&
Const EWX_LOGOFF = 0
Const EWX_SHUTDOWN = 1
Const EWX_REBOOT = 2
Const EWX_FORCE = 4
Const CCDEVICENAME = 32
Const CCFORMNAME = 32
Const DM_BITSPERPEL = &H40000
Const DM_PELSWIDTH = &H80000
Const DM_PELSHEIGHT = &H100000
Const CDS_UPDATEREGISTRY = &H1
Const CDS_TEST = &H4
Const DISP_CHANGE_SUCCESSFUL = 0
Const DISP_CHANGE_RESTART = 1
Const BITSPIXEL = 12
Private Type DEVMODE
dmDeviceName As String * CCDEVICENAME
dmSpecVersion As Integer
dmDriverVersion As Integer
dmSize As Integer
dmDriverExtra As Integer
dmFields As Long
dmOrientation As Integer
dmPaperSize As Integer
dmPaperLength As Integer
dmPaperWidth As Integer
dmScale As Integer
dmCopies As Integer
dmDefaultSource As Integer
dmPrintQuality As Integer
dmColor As Integer
dmDuplex As Integer
dmYResolution As Integer
dmTTOption As Integer
dmCollate As Integer
dmFormName As String * CCFORMNAME
dmUnusedPadding As Integer
dmBitsPerPel As Integer
dmPelsWidth As Long
dmPelsHeight As Long
dmDisplayFlags As Long
dmDisplayFrequency As Long
End Type
Private Declare Function EnumDisplaySettings Lib "user32" Alias "EnumDisplaySettingsA" (ByVal lpszDeviceName As Long, ByVal iModeNum As Long, lpDevMode As Any) As Boolean
Private Declare Function ChangeDisplaySettings Lib "user32" Alias "ChangeDisplaySettingsA" (lpDevMode As Any, ByVal dwFlags As Long) As Long
Private Declare Function ExitWindowsEx Lib "user32" (ByVal uFlags As Long, ByVal dwReserved As Long) As Long
Private Declare Function GetDeviceCaps Lib "gdi32" (ByVal hdc As Long, ByVal nIndex As Long) As Long
Private Declare Function CreateDC Lib "gdi32" Alias "CreateDCA" (ByVal lpDriverName As String, ByVal lpDeviceName As String, ByVal lpOutput As String, ByVal lpInitData As Any) As Long
Private Declare Function DeleteDC Lib "gdi32" (ByVal hdc As Long) As Long
Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
Dim OldX As Long, OldY As Long, nDC As Long
Sub ChangeRes(X As Long, Y As Long, Bits As Long)
Dim DevM As DEVMODE, ScInfo As Long, erg As Long, an As VbMsgBoxResult
'Get the info into DevM
erg = EnumDisplaySettings(0&, 0&, DevM)
'This is what we're going to change
DevM.dmFields = DM_PELSWIDTH Or DM_PELSHEIGHT Or DM_BITSPERPEL
DevM.dmPelsWidth = X 'ScreenWidth
DevM.dmPelsHeight = Y 'ScreenHeight
DevM.dmBitsPerPel = Bits '(can be 8, 16, 24, 32 or even 4)
'Now change the display and check if possible
erg = ChangeDisplaySettings(DevM, CDS_TEST)
'Check if succesfull
Select Case erg&
Case DISP_CHANGE_RESTART
an = MsgBox("You've to reboot", vbYesNo + vbSystemModal, "Info")
If an = vbYes Then
erg& = ExitWindowsEx(EWX_REBOOT, 0&)
End If
Case DISP_CHANGE_SUCCESSFUL
erg = ChangeDisplaySettings(DevM, CDS_UPDATEREGISTRY)
ScInfo = Y * 2 ^ 16 + X
'Notify all the windows of the screen resolution change
SendMessage HWND_BROADCAST, WM_DISPLAYCHANGE, ByVal Bits, ByVal ScInfo
MsgBox "Everything's ok", vbOKOnly + vbSystemModal, "It worked!"
Case Else
MsgBox "Mode not supported", vbOKOnly + vbSystemModal, "Error"
End Select
End Sub
Private Sub Form_Load()
Dim nDC As Long
'retrieve the screen's resolution
OldX = Screen.Width / Screen.TwipsPerPixelX
OldY = Screen.Height / Screen.TwipsPerPixelY
'Create a device context, compatible with the screen
nDC = CreateDC("DISPLAY", vbNullString, vbNullString, ByVal 0&)
'Change the screen's resolution
ChangeRes 640, 480, GetDeviceCaps(nDC, BITSPIXEL)
End Sub
Private Sub Form_Unload(Cancel As Integer)
'restore the screen resolution
ChangeRes OldX, OldY, GetDeviceCaps(nDC, BITSPIXEL)
'delete our device context
DeleteDC nDC
End Sub

[xxxxx_xxxxx]

بهترين كار اين هست كه ابعاد فعلي صفحه نمايش رو بدست بياري، بعد ابعاد دلخواه رو ست كني و در زمان خروج از برنامه اون ابعادي كه در ايتدا خونده بوديد رو ست كنيد/
فكر مي كنم قبلاً تاپيكي براي خوندن رزوليشن جاري صفحه نمايش ايجاد شده بود.
براي تغيير رزوليشن هم كه تاپيك زياده.
اين بهترين كار هست. احتمالاً ديديد كه خيلي از نرم افزارها هم همين كارو مي كنند.

[mmssoft]

بهترين كار اين هست كه ابعاد فعلي صفحه نمايش رو بدست بياري، بعد ابعاد دلخواه رو ست كني و در زمان خروج از برنامه اون ابعادي كه در ايتدا خونده بوديد رو ست كنيد/
فكر مي كنم قبلاً تاپيكي براي خوندن رزوليشن جاري صفحه نمايش ايجاد شده بود.

اين بهترين كار هست. احتمالاً ديديد كه خيلي از نرم افزارها هم همين كارو مي كنند.

کد برای به دست آوردن رزولوشن :

Private Sub Form_Load()
ResWidth = Screen.Width \ Screen.TwipsPerPixelX
ResHeight = Screen.Height \ Screen.TwipsPerPixelY
ScreenRes = ResWidth & "x" & ResHeight
MsgBox (ScreenRes)
End Sub

و برای تغییر رزولوشن :


Option Explicit
Const WM_DISPLAYCHANGE = &H7E
Const HWND_BROADCAST = &HFFFF&
Const EWX_LOGOFF = 0
Const EWX_SHUTDOWN = 1
Const EWX_REBOOT = 2
Const EWX_FORCE = 4
Const CCDEVICENAME = 32
Const CCFORMNAME = 32
Const DM_BITSPERPEL = &H40000
Const DM_PELSWIDTH = &H80000
Const DM_PELSHEIGHT = &H100000
Const CDS_UPDATEREGISTRY = &H1
Const CDS_TEST = &H4
Const DISP_CHANGE_SUCCESSFUL = 0
Const DISP_CHANGE_RESTART = 1
Const BITSPIXEL = 12
Private Type DEVMODE
dmDeviceName As String * CCDEVICENAME
dmSpecVersion As Integer
dmDriverVersion As Integer
dmSize As Integer
dmDriverExtra As Integer
dmFields As Long
dmOrientation As Integer
dmPaperSize As Integer
dmPaperLength As Integer
dmPaperWidth As Integer
dmScale As Integer
dmCopies As Integer
dmDefaultSource As Integer
dmPrintQuality As Integer
dmColor As Integer
dmDuplex As Integer
dmYResolution As Integer
dmTTOption As Integer
dmCollate As Integer
dmFormName As String * CCFORMNAME
dmUnusedPadding As Integer
dmBitsPerPel As Integer
dmPelsWidth As Long
dmPelsHeight As Long
dmDisplayFlags As Long
dmDisplayFrequency As Long
End Type
Private Declare Function EnumDisplaySettings Lib "user32" Alias "EnumDisplaySettingsA" (ByVal lpszDeviceName As Long, ByVal iModeNum As Long, lpDevMode As Any) As Boolean
Private Declare Function ChangeDisplaySettings Lib "user32" Alias "ChangeDisplaySettingsA" (lpDevMode As Any, ByVal dwFlags As Long) As Long
Private Declare Function ExitWindowsEx Lib "user32" (ByVal uFlags As Long, ByVal dwReserved As Long) As Long
Private Declare Function GetDeviceCaps Lib "gdi32" (ByVal hdc As Long, ByVal nIndex As Long) As Long
Private Declare Function CreateDC Lib "gdi32" Alias "CreateDCA" (ByVal lpDriverName As String, ByVal lpDeviceName As String, ByVal lpOutput As String, ByVal lpInitData As Any) As Long
Private Declare Function DeleteDC Lib "gdi32" (ByVal hdc As Long) As Long
Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
Dim OldX As Long, OldY As Long, nDC As Long
Sub ChangeRes(X As Long, Y As Long, Bits As Long)
Dim DevM As DEVMODE, ScInfo As Long, erg As Long, an As VbMsgBoxResult
'Get the info into DevM
erg = EnumDisplaySettings(0&, 0&, DevM)
'This is what we're going to change
DevM.dmFields = DM_PELSWIDTH Or DM_PELSHEIGHT Or DM_BITSPERPEL
DevM.dmPelsWidth = X 'ScreenWidth
DevM.dmPelsHeight = Y 'ScreenHeight
DevM.dmBitsPerPel = Bits '(can be 8, 16, 24, 32 or even 4)
'Now change the display and check if possible
erg = ChangeDisplaySettings(DevM, CDS_TEST)
'Check if succesfull
Select Case erg&
Case DISP_CHANGE_RESTART
an = MsgBox("You've to reboot", vbYesNo + vbSystemModal, "Info")
If an = vbYes Then
erg& = ExitWindowsEx(EWX_REBOOT, 0&)
End If
Case DISP_CHANGE_SUCCESSFUL
erg = ChangeDisplaySettings(DevM, CDS_UPDATEREGISTRY)
ScInfo = Y * 2 ^ 16 + X
'Notify all the windows of the screen resolution change
SendMessage HWND_BROADCAST, WM_DISPLAYCHANGE, ByVal Bits, ByVal ScInfo
MsgBox "Everything's ok", vbOKOnly + vbSystemModal, "It worked!"
Case Else
MsgBox "Mode not supported", vbOKOnly + vbSystemModal, "Error"
End Select
End Sub
Private Sub Form_Load()
Dim nDC As Long
'retrieve the screen's resolution
OldX = Screen.Width / Screen.TwipsPerPixelX
OldY = Screen.Height / Screen.TwipsPerPixelY
'Create a device context, compatible with the screen
nDC = CreateDC("DISPLAY", vbNullString, vbNullString, ByVal 0&)
'Change the screen's resolution
ChangeRes 640, 480, GetDeviceCaps(nDC, BITSPIXEL)
End Sub
Private Sub Form_Unload(Cancel As Integer)
'restore the screen resolution
ChangeRes OldX, OldY, GetDeviceCaps(nDC, BITSPIXEL)
'delete our device context
DeleteDC nDC
End Sub

[powerboy2988]

کد برای تغییر رزولوشن :



' Coded By FPG

Option Explicit
Const WM_DISPLAYCHANGE = &H7E
Const HWND_BROADCAST = &HFFFF&
Const EWX_LOGOFF = 0
Const EWX_SHUTDOWN = 1
Const EWX_REBOOT = 2
Const EWX_FORCE = 4
Const CCDEVICENAME = 32
Const CCFORMNAME = 32
Const DM_BITSPERPEL = &H40000
Const DM_PELSWIDTH = &H80000
Const DM_PELSHEIGHT = &H100000
Const CDS_UPDATEREGISTRY = &H1
Const CDS_TEST = &H4
Const DISP_CHANGE_SUCCESSFUL = 0
Const DISP_CHANGE_RESTART = 1
Const BITSPIXEL = 12
Private Type DEVMODE
dmDeviceName As String * CCDEVICENAME
dmSpecVersion As Integer
dmDriverVersion As Integer
dmSize As Integer
dmDriverExtra As Integer
dmFields As Long
dmOrientation As Integer
dmPaperSize As Integer
dmPaperLength As Integer
dmPaperWidth As Integer
dmScale As Integer
dmCopies As Integer
dmDefaultSource As Integer
dmPrintQuality As Integer
dmColor As Integer
dmDuplex As Integer
dmYResolution As Integer
dmTTOption As Integer
dmCollate As Integer
dmFormName As String * CCFORMNAME
dmUnusedPadding As Integer
dmBitsPerPel As Integer
dmPelsWidth As Long
dmPelsHeight As Long
dmDisplayFlags As Long
dmDisplayFrequency As Long
End Type
Private Declare Function EnumDisplaySettings Lib "user32" Alias "EnumDisplaySettingsA" (ByVal lpszDeviceName As Long, ByVal iModeNum As Long, lpDevMode As Any) As Boolean
Private Declare Function ChangeDisplaySettings Lib "user32" Alias "ChangeDisplaySettingsA" (lpDevMode As Any, ByVal dwFlags As Long) As Long
Private Declare Function ExitWindowsEx Lib "user32" (ByVal uFlags As Long, ByVal dwReserved As Long) As Long
Private Declare Function GetDeviceCaps Lib "gdi32" (ByVal hdc As Long, ByVal nIndex As Long) As Long
Private Declare Function CreateDC Lib "gdi32" Alias "CreateDCA" (ByVal lpDriverName As String, ByVal lpDeviceName As String, ByVal lpOutput As String, ByVal lpInitData As Any) As Long
Private Declare Function DeleteDC Lib "gdi32" (ByVal hdc As Long) As Long
Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long
Dim OldX As Long, OldY As Long, nDC As Long
Sub ChangeRes(X As Long, Y As Long, Bits As Long)
Dim DevM As DEVMODE, ScInfo As Long, erg As Long, an As VbMsgBoxResult
'Get the info into DevM
erg = EnumDisplaySettings(0&, 0&, DevM)
'This is what we're going to change
DevM.dmFields = DM_PELSWIDTH Or DM_PELSHEIGHT Or DM_BITSPERPEL
DevM.dmPelsWidth = X 'ScreenWidth
DevM.dmPelsHeight = Y 'ScreenHeight
DevM.dmBitsPerPel = Bits '(can be 8, 16, 24, 32 or even 4)
'Now change the display and check if possible
erg = ChangeDisplaySettings(DevM, CDS_TEST)
'Check if succesfull
Select Case erg&
Case DISP_CHANGE_RESTART
an = MsgBox("You've to reboot", vbYesNo + vbSystemModal, "Info")
If an = vbYes Then
erg& = ExitWindowsEx(EWX_REBOOT, 0&)
End If
Case DISP_CHANGE_SUCCESSFUL
erg = ChangeDisplaySettings(DevM, CDS_UPDATEREGISTRY)
ScInfo = Y * 2 ^ 16 + X
'Notify all the windows of the screen resolution change
SendMessage HWND_BROADCAST, WM_DISPLAYCHANGE, ByVal Bits, ByVal ScInfo
MsgBox "Everything's ok", vbOKOnly + vbSystemModal, "It worked!"
Case Else
MsgBox "Mode not supported", vbOKOnly + vbSystemModal, "Error"
End Select
End Sub
Private Sub Form_Load()
Dim nDC As Long
'retrieve the screen's resolution
OldX = Screen.Width / Screen.TwipsPerPixelX
OldY = Screen.Height / Screen.TwipsPerPixelY
'Create a device context, compatible with the screen
nDC = CreateDC("DISPLAY", vbNullString, vbNullString, ByVal 0&)
'Change the screen's resolution
ChangeRes 640, 480, GetDeviceCaps(nDC, BITSPIXEL)
End Sub
Private Sub Form_Unload(Cancel As Integer)
'restore the screen resolution
ChangeRes OldX, OldY, GetDeviceCaps(nDC, BITSPIXEL)
'delete our device context
DeleteDC nDC
End Sub



ممکنه منلع رو معرفی کنی؟
یا یک توضیحی بدین؟

[powerboy2988]

فكر كنم همه منظوره منو اشتباه برداشت كردن.
من مي خوام Me.Width و Me.Height فرم هام تغيير كنه
يعني تو يك ابعادي فرم هام يا كوچيكتر ميشه يا بزرگتر
كاري با موقعيتشون ندارم.

[farzinf]

سلام
به نظر من هم اين دوستمون درست مگن كه بهتر ابعاد كنترل هاي روي فرمونو بزرگ و كوچك نسبت به ابعاد تصوير كنيم من خودم به همچين مشكلي برخوردم ابعادو تغيير كنترلها رو تغيير مي دم

[powerboy2988]

خوب یه نمونه سورستو بزار واست درست کنم

اينم نمونه سورس

[VB.SOS]

به نظر من كار خيلي سختيه. بايد براي تك تك فرم ها اين كار رو انجام بدي. يه كامپونتي هست كه با تغيير اندازه فرم بقيه كنترلها رو به نسبت تغيير ميده. ولي يه كم ايراد داره كه خودم رفعش مي كنم. فعلا شما كاري بكنيد كه مثلا 25% صفحه رو فرم اشغال كنه تا من هم اون كنترل رو كاملش كنم

[powerboy2988]

من دارم این کامپوننتو..
اما باید یک راهی باشه.
حتی آسون

[mmssoft]

این سورس فکر کنم مشکلتون رو حل کنه. البته اگه منظورتون رو درست فهمیده باشم :

[powerboy2988]

این سورس فکر کنم مشکلتون رو حل کنه. البته اگه منظورتون رو درست فهمیده باشم :

من ocx سورستو دارم..
اما وقتي تو خاصيت resize فرمم مي زارم. هيچ كاري واسم نمي كنه..
چي كار بايد كرد؟

[saeedzx]

سلام
ببین اینکد بدردت میخوره


Private Sub Form_Resize()
If Me.WindowState <> 1 Then
Panel1.Width = Me.Width - 100
Panel3.Left = Me.Width - (Panel3.Width + 100)
Panel3.Height = Me.Height - 1300
picture1.Width = Me.Width - (Panel3.Width + 100)
picture1.Height = Panel3.Height - 80
End If
End Sub

[powerboy2988]

نه متاسفانه....
ببينيد من از اين ocx هم دارم استفاده مي كنم .. اما مشكل داره..
مي خوام حالت Anchor و Dock تو net. رو پياده سازي كنم.............