سورت حیابی کمک در ادامه برنامه

[Ring Eshgh]

این برنامه سورت حبابی برای 10 عنصوره ولی من میخوام واسه 20 عنصور عمل کنه من مقادیر DW سه رقمی مرتب کنه من مقادیر Arrey افزایش میدم تا 20 عضو دو یا سه رقمی از نوع DW سپس مقادیر MOV BX, 20 می کنم در قسمت code بعد مقدار MOV BX, 20 در قسمت OUTDEC PROC رو هم تغییر میدم اما موقع چاپ شکلک چاپ می کنه ایراد کارم کجاست میشه واسم حلش کنید یا کمکم کنید و بگین چه کارش کنم.



TITLE AL-073 : An AL Program that declares and initialize an array of size
; 10, then display the contents of the array before and after
; sorting it in ascending order by using Bubble Sort method.
.MODEL SMALL
.STACK 100H
.DATA
PROMPT_1 DB 'The contents of the array before sorting : $'
PROMPT_2 DB 0DH,0AH,'The contents of the array after sorting : $'
ARRAY DB 5,3,9,0,2,6,1,7,8,4

.CODE
MAIN PROC
MOV AX, @DATA ; initialize DS
MOV DS, AX
MOV BX, 10 ; set BX=10
LEA DX, PROMPT_1 ; load and display the string PROMPT_1
MOV AH, 9
INT 21H
LEA SI, ARRAY ; set SI=offset address of ARRAY
CALL PRINT_ARRAY ; call the procedure PRINT_ARRAY
LEA SI, ARRAY ; set SI=offset address of the ARRAY
CALL BUBBLE_SORT ; call the procedure BUBBLE_SORT
LEA DX, PROMPT_2 ; load and display the string PROMPT_2
MOV AH, 9
INT 21H
LEA SI, ARRAY ; set SI=offset address of ARRAY
CALL PRINT_ARRAY ; call the procedure PRINT_ARRAY
MOV AH, 4CH ; return control to DOS
INT 21H
MAIN ENDP

PRINT_ARRAY PROC
; this procedure will print the elements of a given array
; input : SI=offset address of the array
; : BX=size of the array
; output : none
PUSH AX ; push AX onto the STACK
PUSH CX ; push CX onto the STACK
PUSH DX ; push DX onto the STACK
MOV CX, BX ; set CX=BX
@PRINT_ARRAY: ; loop label
XOR AH, AH ; clear AH
MOV AL, [SI] ; set AL=[SI]
CALL OUTDEC ; call the procedure OUTDEC
MOV AH, 2 ; set output function
MOV DL, 20H ; set DL=20H
INT 21H ; print a character
INC SI ; set SI=SI+1
LOOP @PRINT_ARRAY ; jump to label @PRINT_ARRAY while CX!=0
POP DX ; pop a value from STACK into DX
POP CX ; pop a value from STACK into CX
POP AX ; pop a value from STACK into AX
RET ; return control to the calling procedure
PRINT_ARRAY ENDP

BUBBLE_SORT PROC
; this procedure will sort the array in ascending order
; input : SI=offset address of the array
; : BX=array size
; output : none
PUSH AX ; push AX onto the STACK
PUSH BX ; push BX onto the STACK
PUSH CX ; push CX onto the STACK
PUSH DX ; push DX onto the STACK
PUSH DI ; push DI onto the STACK
MOV AX, SI ; set AX=SI
MOV CX, BX ; set CX=BX
DEC CX ; set CX=CX-1
@OUTER_LOOP: ; loop label
MOV BX, CX ; set BX=CX
MOV SI, AX ; set SI=AX
MOV DI, AX ; set DI=AX
INC DI ; set DI=DI+1
@INNER_LOOP: ; loop label
MOV DL, [SI] ; set DL=[SI]
CMP DL, [DI] ; compare DL with [DI]
JNG @SKIP_EXCHANGE ; jump to label @SKIP_EXCHANGE if DL<[DI]
XCHG DL, [DI] ; set DL=[DI], [DI]=DL
MOV [SI], DL ; set [SI]=DL
@SKIP_EXCHANGE: ; jump label
INC SI ; set SI=SI+1
INC DI ; set DI=DI+1
DEC BX ; set BX=BX-1
JNZ @INNER_LOOP ; jump to label @INNER_LOOP if BX!=0
LOOP @OUTER_LOOP ; jump to label @OUTER_LOOP while CX!=0
POP DI ; pop a value from STACK into DI
POP DX ; pop a value from STACK into DX
POP CX ; pop a value from STACK into CX
POP BX ; pop a value from STACK into BX
POP AX ; pop a value from STACK into AX
RET ; return control to the calling procedure
BUBBLE_SORT ENDP

OUTDEC PROC
; this procedure will display a decimal number
; input : AX
; output : none
PUSH BX ; push BX onto the STACK
PUSH CX ; push CX onto the STACK
PUSH DX ; push DX onto the STACK
XOR CX, CX ; clear CX
MOV BX, 10 ; set BX=10
@OUTPUT: ; loop label
XOR DX, DX ; clear DX
DIV BX ; divide AX by BX
PUSH DX ; push DX onto the STACK
INC CX ; increment CX
OR AX, AX ; take OR of Ax with AX
JNE @OUTPUT ; jump to label @OUTPUT if ZF=0
MOV AH, 2 ; set output function
@DISPLAY: ; loop label
POP DX ; pop a value from STACK to DX
OR DL, 30H ; convert decimal to ascii code
INT 21H ; print a character
LOOP @DISPLAY ; jump to label @DISPLAY if CX!=0
POP DX ; pop a value from STACK into DX
POP CX ; pop a value from STACK into CX
POP BX ; pop a value from STACK into BX
RET ; return control to the calling procedure
OUTDEC ENDP
END MAIN

[xman_1365_x]

اينم سورس اصلاح شده شما براي اعداد سه رقمي
دقت كني ميبيني چيا رو تغيير دادم


TITLE AL-073 : An AL Program that declares and initialize an array of size
; 10, then display the contents of the array before and after
; sorting it in ascending order by using Bubble Sort method.
.MODEL SMALL
.STACK 100H
.DATA
PROMPT_1 DB 'The contents of the array before sorting : $'
PROMPT_2 DB 0DH,0AH,'The contents of the array after sorting : $'
ARRAY Dw 523,321,921,123,421,620,111,710,800,468,225,418,22 5,618,205,104,252,102,316,224
.CODE
MAIN PROC
MOV AX, @DATA ; initialize DS
MOV DS, AX
MOV BX, 20 ; set BX=20
LEA DX, PROMPT_1 ; load and display the string PROMPT_1
MOV AH, 9
INT 21H
LEA SI, ARRAY ; set SI=offset address of ARRAY
CALL PRINT_ARRAY ; call the procedure PRINT_ARRAY
LEA SI, ARRAY ; set SI=offset address of the ARRAY
CALL BUBBLE_SORT ; call the procedure BUBBLE_SORT
LEA DX, PROMPT_2 ; load and display the string PROMPT_2
MOV AH, 9
INT 21H
LEA SI, ARRAY ; set SI=offset address of ARRAY
CALL PRINT_ARRAY ; call the procedure PRINT_ARRAY
MOV AH, 4CH ; return control to DOS
INT 21H
MAIN ENDP
PRINT_ARRAY PROC
; this procedure will print the elements of a given array
; input : SI=offset address of the array
; : BX=size of the array
; output : none
PUSH AX ; push AX onto the STACK
PUSH CX ; push CX onto the STACK
PUSH DX ; push DX onto the STACK
MOV CX, BX ; set CX=BX
@PRINT_ARRAY: ; loop label
XOR ax, ax ; clear AH
MOV Ax, [SI] ; set AL=[SI]
CALL OUTDEC ; call the procedure OUTDEC
MOV AH, 2 ; set output function
MOV DL, 20H ; set DL=20H
INT 21H ; print a character
add SI,2 ; set SI=SI+2
LOOP @PRINT_ARRAY ; jump to label @PRINT_ARRAY while CX!=0
POP DX ; pop a value from STACK into DX
POP CX ; pop a value from STACK into CX
POP AX ; pop a value from STACK into AX
RET ; return control to the calling procedure
PRINT_ARRAY ENDP
BUBBLE_SORT PROC
; this procedure will sort the array in ascending order
; input : SI=offset address of the array
; : BX=array size
; output : none
PUSH AX ; push AX onto the STACK
PUSH BX ; push BX onto the STACK
PUSH CX ; push CX onto the STACK
PUSH DX ; push DX onto the STACK
PUSH DI ; push DI onto the STACK
MOV AX, SI ; set AX=SI
MOV CX, BX ; set CX=BX
DEC CX ; set CX=CX-1
@OUTER_LOOP: ; loop label
MOV BX, CX ; set BX=CX
MOV SI, AX ; set SI=AX
MOV DI, AX ; set DI=AX
add DI,2 ; set DI=DI+1
@INNER_LOOP: ; loop label
MOV Dx, [SI] ; set DL=[SI]
CMP Dx, [DI] ; compare DL with [DI]
JNG @SKIP_EXCHANGE ; jump to label @SKIP_EXCHANGE if DL<[DI]
XCHG Dx, [DI] ; set DL=[DI], [DI]=DL
MOV [SI], Dx ; set [SI]=DL
@SKIP_EXCHANGE: ; jump label
add SI,2 ; set SI=SI+1
add DI,2 ; set DI=DI+1
DEC BX ; set BX=BX-1
JNZ @INNER_LOOP ; jump to label @INNER_LOOP if BX!=0
LOOP @OUTER_LOOP ; jump to label @OUTER_LOOP while CX!=0
POP DI ; pop a value from STACK into DI
POP DX ; pop a value from STACK into DX
POP CX ; pop a value from STACK into CX
POP BX ; pop a value from STACK into BX
POP AX ; pop a value from STACK into AX
RET ; return control to the calling procedure
BUBBLE_SORT ENDP
OUTDEC PROC
; this procedure will display a decimal number
; input : AX
; output : none
PUSH BX ; push BX onto the STACK
PUSH CX ; push CX onto the STACK
PUSH DX ; push DX onto the STACK
XOR CX, CX ; clear CX
MOV BX, 10 ; set BX=10
@OUTPUT: ; loop label
XOR DX, DX ; clear DX
DIV BX ; divide AX by BX
PUSH DX ; push DX onto the STACK
INC CX ; increment CX
OR AX, AX ; take OR of Ax with AX
JNE @OUTPUT ; jump to label @OUTPUT if ZF=0
MOV AH, 2 ; set output function
@DISPLAY: ; loop label
POP DX ; pop a value from STACK to DX
OR DL, 30H ; convert decimal to ascii code
INT 21H ; print a character
LOOP @DISPLAY ; jump to label @DISPLAY if CX!=0
POP DX ; pop a value from STACK into DX
POP CX ; pop a value from STACK into CX
POP BX ; pop a value from STACK into BX
RET ; return control to the calling procedure
OUTDEC ENDP
END MAIN