hamed.taran71
جمعه 16 فروردین 1392, 00:35 صبح
خدمت استادان و پیشکسوتان عزیز سلام عرض میکنم.
سوال من اینه که چجوری میتونم با پی اچ پی از فایل ویدئویی flv عکس بگیرم؟ این عکسو بعنوان
پیش نمایش فیلم که مثلا یه لینکه استفاده کنم. خیلی از سایتارو گشتم ولی به نتیجه مطلوبی نرسیدم.
چند نمونه کد دیدم ولی از اونجایی که من مبتدی هستم سر در نیاووردم.
مثلا توی کد زیر که از یه سایت خارجی پیداش کردم نمیدونم قضیه از چه قراره، خود فایل فلش که کد پی اچ پی قراره از یکی از فریماش عکس بگیره اصلا لینکشو نمیبینم، فقط تعدادی پیکسلو توی یه حلقه با پست گرفته و
در آخر تبدیل به عکس شده،
من واقعا گیج شدم، از اساتید محترم خواهشم اینه که یه راهنمایی کامل انجام بدن، چون یه سرچ بزنین میبینین
که جاب قطعی پیدا نمیشه واسش، همه سواله!
error_reporting(1);
/**
* Get the width and height of the destination image
* from the POST variables and convert them into
* integer values
*/
$w = (int)$_POST['width'];
$h = (int)$_POST['height'];
// create the image with desired width and height
$img = imagecreatetruecolor($w, $h);
$img_new = imagecreatetruecolor($w, $h);
// now fill the image with blank color
// do you remember i wont pass the 0xFFFFFF pixels
// from flash?
imagefill($img, 0, 0, 0xFFFFFF);
$rows = 0;
$cols = 0;
// now process every POST variable which
// contains a pixel color
for($rows = 0; $rows < $h; $rows++){
// convert the string into an array of n elements
$c_row = explode(",", $_POST['px' . $rows]);
for($cols = 0; $cols < $w; $cols++){
// get the single pixel color value
$value = $c_row[$cols];
// if value is not empty (empty values are the blank pixels)
if($value != ""){
// get the hexadecimal string (must be 6 chars length)
// so add the missing chars if needed
$hex = $value;
while(strlen($hex) < 6){
$hex = "0" . $hex;
}
// convert value from HEX to RGB
$r = hexdec(substr($hex, 0, 2));
$g = hexdec(substr($hex, 2, 2));
$b = hexdec(substr($hex, 4, 2));
// allocate the new color
// N.B. teorically if a color was already allocated
// we dont need to allocate another time
// but this is only an example
$test = imagecolorallocate($img, $r, $g, $b);
// and paste that color into the image
// at the correct position
imagesetpixel($img, $cols, $rows, $test);
}
}
}
imagecopyresized ( $img_new , $img , 0 , 0 , 0 , 0 , 1000 , 600 , $w , $h );
$time = time();
// print out the correct header to the browser
header("Content-type:image/jpeg");
imagejpeg($img_new, "", 90);
imagejpeg($img_new, "../".$_GET['email']."/".$time.".jpg");
سوال من اینه که چجوری میتونم با پی اچ پی از فایل ویدئویی flv عکس بگیرم؟ این عکسو بعنوان
پیش نمایش فیلم که مثلا یه لینکه استفاده کنم. خیلی از سایتارو گشتم ولی به نتیجه مطلوبی نرسیدم.
چند نمونه کد دیدم ولی از اونجایی که من مبتدی هستم سر در نیاووردم.
مثلا توی کد زیر که از یه سایت خارجی پیداش کردم نمیدونم قضیه از چه قراره، خود فایل فلش که کد پی اچ پی قراره از یکی از فریماش عکس بگیره اصلا لینکشو نمیبینم، فقط تعدادی پیکسلو توی یه حلقه با پست گرفته و
در آخر تبدیل به عکس شده،
من واقعا گیج شدم، از اساتید محترم خواهشم اینه که یه راهنمایی کامل انجام بدن، چون یه سرچ بزنین میبینین
که جاب قطعی پیدا نمیشه واسش، همه سواله!
error_reporting(1);
/**
* Get the width and height of the destination image
* from the POST variables and convert them into
* integer values
*/
$w = (int)$_POST['width'];
$h = (int)$_POST['height'];
// create the image with desired width and height
$img = imagecreatetruecolor($w, $h);
$img_new = imagecreatetruecolor($w, $h);
// now fill the image with blank color
// do you remember i wont pass the 0xFFFFFF pixels
// from flash?
imagefill($img, 0, 0, 0xFFFFFF);
$rows = 0;
$cols = 0;
// now process every POST variable which
// contains a pixel color
for($rows = 0; $rows < $h; $rows++){
// convert the string into an array of n elements
$c_row = explode(",", $_POST['px' . $rows]);
for($cols = 0; $cols < $w; $cols++){
// get the single pixel color value
$value = $c_row[$cols];
// if value is not empty (empty values are the blank pixels)
if($value != ""){
// get the hexadecimal string (must be 6 chars length)
// so add the missing chars if needed
$hex = $value;
while(strlen($hex) < 6){
$hex = "0" . $hex;
}
// convert value from HEX to RGB
$r = hexdec(substr($hex, 0, 2));
$g = hexdec(substr($hex, 2, 2));
$b = hexdec(substr($hex, 4, 2));
// allocate the new color
// N.B. teorically if a color was already allocated
// we dont need to allocate another time
// but this is only an example
$test = imagecolorallocate($img, $r, $g, $b);
// and paste that color into the image
// at the correct position
imagesetpixel($img, $cols, $rows, $test);
}
}
}
imagecopyresized ( $img_new , $img , 0 , 0 , 0 , 0 , 1000 , 600 , $w , $h );
$time = time();
// print out the correct header to the browser
header("Content-type:image/jpeg");
imagejpeg($img_new, "", 90);
imagejpeg($img_new, "../".$_GET['email']."/".$time.".jpg");